One of the Largest, Most Complete

LED Testing Facilities in North America

Integration Spheres

LED SMART has on-site, two integration spheres. One being 2 Meters in diameter to measure the light output of larger items and fully finished fixtures. The other being 16” to measure individual PCB boards
before full-fixture assembly.


This piece of equipment is vital to LED Smart’s R&D and production team to ensure that the products are designed and produced according to the specifications required for light output.

blue%20sphere_edited.jpg

Temperature Test Chamber

LED SMART’s large-scale temperature chamber is 2000L 3 (528 gal 3 ), and has the ability to test from -70°C ~150°C. With quick cooling and heat adjustment to temperatures within 0.1°C, these tests are highly accurate. In addition, it has the ability to perform humidity (20% ~98%RH) tests within the chamber at the same time as the temperature. With featured programmed temperature changes and fluctuations, LED Smart can increase and decrease temperature and humidity within the chamber over a long cycle to simulate real  environment conditions.

Copy of DSCF2374.jpg

Photometric Chamber

LED SMART has one of the very few Photometric Chambers in Canada, and likely the only one in Western
Canada.

 

This chamber is vital for testing and confirming lumen output and light patterns. Capable of measuring
the light performance of any type of light from small bulbs to large fixtures.

 

The interior of the chamber being fully fitted
with matte black surface. The goniometer that is fixed at the distance of 10M from the light source. The
photometric measurements are then captured in approximately 15 minutes per light source.

Photometric%20room_edited.jpg

High Speed SMD Assembly Line

LED SMART has two high-speed automated assembly lines which place electronic components onto circuit boards.

 

By having this in operation we are able to produce the high-volume production levels that are needed for large projects.

smd machines-15.jpg

Automated Wire Processing 

Wire cutting and stripping is an important part of the overall product assembly process.

 

At the same time this device is able to process a variety of wire and cable gauges to pre-programmed lengths. 

blue%20sphere_edited.jpg

3D Printing and Prototyping

Our 3D printing allows us to construct a three-dimensional object from a CAD model or a digital 3D model.

One of the great advantages of our 3D printing is the fact that it gives us the ability to produce complex shapes, or geometries that would otherwise be impossible to construct by traditional means. 

blue%20sphere_edited.jpg

EMC/EMI Chamber

LED Smart has one of the only privately held EMC/EMI chambers in North America, and one of very few in Canada.

 

Our EMI/EMC chamber is critical to measuring electromagnetic radiation and conductance for the designed and produced lighting systems to be compliant with standards such as MIL-STD-46, CE101, CE102, RE101, RE102 and FCC part 15 or 18.

blue%20sphere_edited.jpg

Multi Axis Vibration Table

This is a 3D dimension test with various accelerations to see what the lamp can withstand within the elements it can possibly be exposed to.

blue%20sphere_edited.jpg

Tube Testing Racks

A burn test is performed to ensure the device runs properly before it leaves the LED SMART facility. 

We run this test for 2 hours each time to ensure it meets our high quality standards. During these two hours the pre-programmed test racks simulate various voltage and current fluctuations that a light may experience in real life environments. 

blue%20sphere_edited.jpg

Contact INFORMATION

18905 32 Ave Surrey, BC  V37 1A7

​​Toll-Free: 1.800.457.0416

Office: 1.604.385.1236

Fax: 1.604.385.4560

  • Instagram
  • LinkedIn
  • YouTube
Lighting the Future with TechnologyTM

Copyright LED SMART Inc. All rights reserved.